Wood & steel frame
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Selma, TX
Calder Gate Repair is the gate company Selma homeowners call when a driveway gate stops opening, starts grinding, or simply quits after a power surge. Most Selma properties were built between the 1990s and 2010s inside master-planned communities, which means a lot of ornamental steel and aluminum gates running on low-voltage wiring and basic operators now reaching the end of their natural life. Selma’s heat and the occasional hard freeze push those aging parts faster than most people expect. If your gate is acting up, call (361) 314-4803 and you’ll get a live person who can schedule a real arrival time, not a four-hour window.
Why Selma Homes Are Different
Selma’s rapid suburban expansion created a patchwork of neighborhoods with gate styles and ages all over the map. What ties them together is the retrofit wave happening right now: homeowners are upgrading older, builder-grade gates with smart openers and security features, and those jobs require a technician who can integrate modern controls into infrastructure that was never designed for them. That’s most of what we do in Selma.
The climate works against these systems in predictable ways. Selma’s hot summers cause thermal expansion in steel tracks and hinges, which throws off alignment over time. Cracked plastic gears inside openers are common by mid-August. Then a cold snap hits in January, and we get calls about batteries in solar-powered openers that won’t hold a charge. In the older section of Selma near the original townsite, rust at the base of steel gate posts is a recurring problem: soil moisture and occasional flooding from Cibolo Creek sit against the metal and do exactly what you’d expect. A gate that looks fine from ten feet away can have a post base that’s quietly failing at ground level.
Many Selma communities also have HOA guidelines about gate appearance and function. If your gate is visible from the street and it’s stuck open or sagging, you’re probably already hearing about it.
Styles & brands we work with
Our Main Selma Services
These three jobs cover almost every call we run in Selma, and each one has its own page with local pricing and specifics.
Gate Repair in Selma
This covers the gate itself: bent or rusted posts, sagging hinges, misaligned tracks, wheels that have worn flat, and latch hardware that no longer catches cleanly. In Selma, rust repair at post bases near the older townsite is a frequent call, and we treat the metal properly before repainting or reinforcing. If your gate drags on the ground or won’t close square, start here. Gate Repair in Selma has the full breakdown.
Electric Gate Repair in Selma
Electric gate work covers the powered side: motors, control boards, safety sensors, low-voltage wiring, and the keypads or intercom systems that tell the gate what to do. Selma’s heat pushes motors hard, and low-voltage wire run through hot attics or along sun-baked driveway edges gets brittle faster than you’d think. Electric Gate Repair in Selma explains what typically fails and what it costs.
Gate Opener Repair in Selma
The opener is the mechanical brain and muscle: the swing arm or slide operator, the limit switches that tell the gate when to stop, and the receiver that talks to your remote. When a gate opens halfway and stops, or reverses for no reason, that’s usually an opener issue. Retrofits onto older Selma gates are a big part of this work. Gate Opener Repair in Selma covers common failures and replacement advice.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Selma
Our technicians are factory-familiar with Linear, Viking, Ghost Controls, and DoorKing, plus five other major brands. We stock common control boards, limit switches, and remote transmitters locally so most Selma repairs don’t wait on a parts shipment. See our brands for the complete list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Selma, TX
| Service | Typical range in Selma |
|---|---|
| Gate opener diagnostic and repair | $180 – $340 before parts |
| Limit switch replacement | $95 – $185 |
| Control board replacement | $220 – $450 |
| Swing arm operator replacement | $550 – $1,100 |
| Slide gate operator replacement | $650 – $1,300 |
| Solar opener battery replacement | $130 – $250 |
| Hinge and post alignment repair | $150 – $300 |
| Track and wheel replacement | $180 – $360 |
| Remote transmitter programming | $50 – $120 |
| Full opener retrofit with smart controls | $850 – $1,600 |
Two things push Selma pricing up: rust repair on older steel posts near the Cibolo Creek floodplain, and retrofit jobs where new smart openers have to be integrated into wiring that’s two decades old. Whatever the number, you get it in writing before any work starts. The invoice matches the quote, every time.
Neighborhoods We Serve in Selma
We run calls all over Selma, and most neighborhoods in town can get a technician out the same day or next morning. Here’s a representative sample:
- Retama Springs
- Cibolo Creek Ranch
- The Enclave at Retama
- Selma Parke
- Olympia Hills (Selma side)
Service Area – Cities Near Selma
Our Selma crews also cover the surrounding metro. If you’re on the edge of town or just over the line, we regularly work in San Antonio, TX, Cibolo, TX, Helotes, TX, and Bulverde, TX. Same written-price guarantee, same tracked arrival, no matter which side of the city limit sign you’re on.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Selma
Most Selma calls get a same-day or next-morning visit, and we dispatch with a live, trackable arrival time so you’re not stuck waiting on a vague window. A gate stuck open is a security issue, and we treat it that way. Call (361) 314-4803 and a person answers, 24/7.
Some Selma communities require approval for visible changes like a new gate style or a different opener housing, but direct repairs matching the existing hardware usually sail through. If you’re unsure, we can tell you what’s typical for your specific community when you call, and our written quote covers whatever the HOA needs to see.
Yes, and we see a lot of rust repair there. The soil holds moisture near Cibolo Creek, and steel post bases corrode faster than they would in newer, better-drained neighborhoods. We inspect the post base as part of every repair in that area, not just the obvious mechanical problem. Call (361) 314-4803 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Selma Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.