Wood & steel frame
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Opener Repair Across Selma
Gate opener repair in Selma typically runs $185 – $420 before parts, and in most cases we can have a technician at your door the same day you call. If your opener is dead, grinding, or stopping halfway, don’t force the gate manually – Selma’s ornamental steel gates are heavy, and a failed operator can put serious strain on the hinge posts. Call Calder Gate Repair San Antonio at (361) 314-4803 and you’ll get a live person, a written price before any work starts, and a real arrival time you can track.
We work throughout Selma every week, from the older streets near the original townsite off IH-35 to the newer master-planned communities like Olympia Hills and Kensington Ranch. What we see out here more than anything is builder-grade operators that were undersized the day they went in. The gate looked great at the closing table, but the motor behind it was never built for daily use in Texas heat. Our Gate Opener Repair team knows exactly which brands fail, which ones hold up, and how to fix both without tearing up your driveway.
Why Calder Gate Repair San Antonio Is Selma’s Preferred Gate Opener Repair Company
We answer the phone. That sounds basic, but when your gate is stuck open at 7 a.m. and you’re trying to get kids to school, a voicemail is worthless. Calder Gate Repair has a live person on the line 24/7, and they can schedule a Selma dispatch, update your arrival window, or walk you through a safe manual release while you wait.
Our technicians are background-checked, uniformed, and factory-familiar with nine major opener brands including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we roll up to a Selma home, we’re not guessing. We’ve seen the specific failure patterns in this area – the cracked plastic gearboxes from freezing nights, the solar batteries that die on hot afternoons, the rusted post bases near Cibolo Creek – and we stock the parts that fix them without a second trip.
Every job carries the 365-Day Done Right Promise. If the repair fails within 365 days, we return at no charge. That’s in writing, on every single invoice, for every single Selma customer. And before we touch a bolt, you get a written price. The number on the invoice is the number you agreed to at the door. No surprises, no “we found something else.”
Calder Gate Repair is part of the Relay Home Co. family, established in 2009, and each location is independently owned and operated under The Relay Visibility Guarantee. Led by Nico Alvarez, our technicians serve Selma locally with dispatch and scheduling coordinated from the brand’s San Antonio office.
Styles & brands we work with


Gate Servicing in Selma
Gate servicing in Selma is the maintenance work that prevents a dead opener, and frankly it’s the most overlooked service call we run. Selma’s hot summers and occasional freezing winter nights expand and contract metal components, dry out grease, and bake the plastic internals of builder-grade operators. A service visit catches the small stuff – a loose hinge, a dry gear, a battery that’s about to quit – before it becomes a 6 a.m. emergency.
Most gate servicing calls in Selma run $150 – $285, and the visit includes a full inspection of the operator, hinges, wheels, safety sensors, and the control board. We clean contacts, lubricate the drive mechanism, adjust the force settings, and test the auto-reverse. If we find something that needs replacement, you get a written price before we order anything.
Seasonal Servicing for Selma’s Climate
Selma’s freeze-thaw cycle is rough on gate hardware. We recommend a service check in late fall, before the first hard freeze, because plastic gears and old batteries tend to fail exactly when temperatures drop. We also check the low-voltage wiring runs, because Selma’s clay-heavy soil shifts with moisture changes and can pull connections loose over time.
What a Service Visit Actually Includes
We test the full open-close cycle under load, not just with the gate in the air. We verify the safety photocells are aligned, the loop detector is responding, and the force settings aren’t too high – an over-forced opener is what bends gate frames and burns out motors. You get a written summary of what we found and what we recommend, with prices, so you can plan rather than panic.
Gate Intercom in Selma
Gate intercom in Selma covers the call box, keypad, and video entry systems that let you open the gate from the house or from your phone. Selma’s newer communities often came with a basic intercom that’s now a decade old, and the wiring for it is typically surface-run and exposed to Texas sun. We replace failed keypads, upgrade buzzing intercoms to cellular-based systems, and integrate the intercom with your existing opener – even if the original installer said that wasn’t possible.
Gate intercom repair and replacement in Selma typically runs $220 – $480 depending on whether we’re repairing the existing box or installing a new cellular unit. We’ll quote the full job before any work starts, including the wiring, the mounting, and the programming.
Upgrading to Smartphone Entry
Most Selma homeowners we meet want to open the gate from their phone, not from a yellowed keypad with sun-faded buttons. We install intercom systems that ring to your smartphone, let you see who’s at the gate with a camera, and open it remotely. If you already use a Ghost Controls or LiftMaster opener, these integrate cleanly without replacing the motor.
Storm and Lightning Repairs
Selma thunderstorms bring lightning, and lightning fries intercom boards. After a big storm, a common call is a keypad that lights up but never triggers the opener. We diagnose the board, check the relay, and often replace the surge-damaged components the same visit. A surge protector on the low-voltage side is a cheap add that’s stopped many Selma customers from a repeat bill.
Trusted Brands We Service in Selma
We’re factory-familiar with nine major gate opener brands, and in Selma we work on Viking, Ghost Controls, DoorKing, and Elite more than most. Each has its own failure signature. Viking operators, common on Selma’s ornamental steel gates, tend to eat control boards when the capacitor ages. Ghost Controls solar units struggle with battery life on Selma’s triple-digit afternoons. DoorKing and Elite swing operators are reliable when they’re serviced, but their plastic gears crack on freezing nights just like the rest. Because we know each brand’s weak points, we stock common Selma parts locally – capacitors, gear kits, control boards, solar batteries – meaning less waiting for your repair.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Opener Repair Problems We See in Selma Homes
- Solar opener batteries dying on hot afternoons. Selma’s builder-grade solar openers, especially on Ghost Controls units, charge fine in the morning but overheat and fail by 3 p.m. The gate gets parked half-open after the school run, and the battery never recovers. The fix is usually a higher-capacity battery and a panel reposition, not a whole new opener.
- Concrete aprons with no loop detector conduit. In 2000s neighborhoods like Olympia Hills, the driveway apron was poured bare – no conduit for a loop detector. The gate doesn’t see the car, fails to close fully, and then the operator overheats trying to force the latch against a sagging post. We add a surface-mounted loop or retrofit a photocell pair to solve it.
- Rust at the base of steel gate posts near Cibolo Creek. Older Selma sections, especially the original townsite, sit on soil that holds moisture from the creek. Steel posts rot at the base, the gate sags, and the opener has to work twice as hard until it burns out. We cut and re-set the post footing, treat the metal, and often save the gate itself.
- Cracked plastic gearboxes after winter freezes. Basic Linear and BFT operators don’t like a Selma cold snap. The plastic gears shrink and crack, and the opener sounds like it’s grinding coffee beans. The repair is straightforward – a gear kit replacement – but only if you catch it before the motor shaft gets scored.
Pricing for Gate Opener Repair in Selma, TX
Most gate opener repairs in Selma run $185 – $420 before parts. A straightforward limit switch replacement – the small sensor that tells the gate where to stop – runs $185 – $260. A burnt-out control board on a LiftMaster or Viking unit runs $240 – $420. Gear kits for Linear and BFT openers run $160 – $280 including labor. Solar battery upgrades on Ghost Controls units run $120 – $230. Full operator replacements, when the old one is truly done, run $850 – $1,900 depending on the brand and gate weight. Every quote is written, itemized, and agreed to before we start. Call (361) 314-4803 for an exact quote – estimates are free.
We Also Serve Cities Near Selma
Beyond Selma, our technicians regularly run calls to San Antonio, Cibolo, Helotes, and Bulverde. If you’re just outside Selma city limits, give us a call and we’ll confirm coverage for your address. Our San Antonio dispatch coordinates the whole area, so a Selma appointment gets scheduled as efficiently as one closer to the metro office.
Serving Selma, TX - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Opener Repair in Selma
The most common cause is a solar battery that’s overheating and failing under Selma’s afternoon heat. The panel charges it fine in the morning, but the battery can’t hold the charge once the temperature climbs. The fix is usually a higher-capacity battery and a panel reposition to get shade during the hottest hours. Call (361) 314-4803 and we’ll test the battery and panel output on site – the test takes under an hour.
Yes. Selma’s master-planned communities often have manual ornamental gates with no conduit in place, but we add automation without tearing up your driveway. We surface-mount the low-voltage wire in a weatherproof conduit run, add a loop or photocell pair for vehicle detection, and mount a swing arm opener sized for the gate’s weight. We’ve done this in Kensington Ranch, Olympia Hills, and throughout Selma’s newer sections. A full automation retrofit runs $1,600 – $2,900 installed.
Usually not. The rust is at the base, where soil moisture from Cibolo Creek sits against the post. In most cases we can cut the post, re-set it in a new concrete footing, treat the metal, and repaint. The gate itself often has years of life left. We’ll inspect the post, tell you honestly if the gate can be saved, and give you a written price either way. Estimates are free – call (361) 314-4803.
No, that grinding sound usually means the plastic gear inside the operator has cracked, typically after a Selma freeze. The gear shrinks in cold weather and splits under load. Running the opener with a cracked gear can score the motor shaft and turn a $200 gear replacement into a $900 motor replacement. Stop using the gate, set it to manual if you can, and call (361) 314-4803 – we stock LiftMaster gear kits and can usually fix it same day.
The buzz usually means the intercom is getting power but the relay that triggers the opener is stuck or surge-damaged. Selma thunderstorms bring lightning, and a nearby strike on the low-voltage line cooks the relay board. Don’t open the box yourself – there’s live low-voltage wiring inside and the board may be damaged in ways you can’t see. Call (361) 314-4803 and a technician will test the relay, check the opener input, and replace the damaged component the same visit.
Written by Nico Alvarez, Owner at Calder Gate Repair San Antonio, serving Selma since 2009.