Wood & steel frame
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Converse
If your gate won’t open, sags into the driveway, or trips its sensor every time a Converse thunderstorm rolls through, you want the problem fixed today – not after three days of phone tag. Most gate opener repairs in Converse run $180 to $340 before parts, and our crews carry common components on the truck so we can finish most jobs in a single visit. Calder Gate Repair is the dedicated Gate Repair team inside the Relay Home Co. family, and we dispatch background-checked, uniformed technicians to Converse with a live, trackable arrival time – not a four-hour window. Call (361) 314-4803 and a real person answers, 24/7.
Converse isn’t a one-size-fits-all town. You’ve got HOA subdivisions off Toepperwein Road, older 1970s ranch homes near Gibbs Sprawl Road, and semi-rural lots along Miller Road where the gate hasn’t been square since the last big rain. That mix changes how a gate fails and what it takes to fix it right. We know the difference because we work it every week.
Key Takeaways
- Most gate opener repairs in Converse run $180 to $340 before parts; hinge and post work typically runs $250 to $600 depending on footing condition.
- Clay-rich Converse soil expands and contracts with rain and drought, which is the leading cause of sagging gates and binding hinge posts in this area.
- Many Converse HOA communities require gate repairs to match existing ornamental designs and finishes – we coordinate with management companies on approval before turning a wrench.
- Every job includes a written price before work starts, a written guarantee, and a free second visit if the repair fails within 365 days.
Styles & brands we work with
Why Calder Gate Repair San Antonio Is Converse’s Preferred Gate Repair Company
Converse homeowners call us because the neighborhood grapevine works faster than any ad. When a DoorKing slide gate at an HOA entrance off Kitty Hawk Road fails, the property manager needs someone who can show up today, diagnose in plain English, and keep resident access live while the work happens. That’s the standard we’ve built with communities across Converse, from newer subdivisions with ornamental wrought-iron driveway gates to older acreage properties with pipe gates and solar openers.
Our technicians train across nine major opener brands – LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule – because Converse’s housing mix means no two service calls look alike. One afternoon is a LiftMaster slide gate with a shorted loop detector; the next is a Mighty Mule swing arm on a three-acre lot off Lower Seguin Road that hasn’t closed fully since spring. Nico Alvarez, who leads our San Antonio team, built the Calder approach around one idea: the customer knows the price, knows the time, and knows the person coming before the truck leaves the shop. That’s the Relay Standard – live arrival tracking, before-and-after photos, and a digital invoice you pay from a link. No mystique, no surprises.
We coordinate scheduling and dispatch from our San Antonio office, and our crews serve Converse directly throughout the week, including emergency calls on nights and weekends.
Wood Gate Repair in Converse
Wood Gate Repair in Converse usually means two things: structural re-hanging after clay soil movement, and surface repair after humid summers and storm-driven moisture. Wood gates here rarely fail all at once. They start by dragging on the latch side, then the hinge post leans, then the boards swell and the gate sticks. If you catch it at the dragging stage, you’re looking at $180 to $320 for re-alignment and hinge adjustment. If the post footing has shifted and needs resetting, plan for $350 to $650 depending on how far the concrete has cracked and whether the post is salvageable.
Hinge and Post Reset
Converse clay expands when wet and shrinks when dry, and a 6×6 post set in concrete will move with it. We dig out the old footing, reset the post plumb, and re-pack with gravel and concrete rated for expansive soil. On gates that have pulled the hinge screws loose, we through-bolt the hinges rather than reusing threaded holes that will only fail again next season.
Warped Board and Panel Replacement
Humidity in the San Antonio area works on wood gates the way it works on decking – boards cup, nails back out, and the bottom rail rots first. We replace warped or rotted sections with pressure-treated or cedar stock, match the existing stain or paint, and re-secure hardware. For Converse HOAs that require appearance consistency, we document the repair before, during, and after so the architectural review has a paper trail.
Driveway Gate Repair in Converse
Driveway Gate Repair in Converse spans two very different jobs: automated gates in HOA subdivisions that need to match community standards, and manual or solar-powered gates on semi-rural lots where simplicity matters more than curb appeal. The most common call we get from Converse driveways is a gate that stops mid-cycle or reverses for no apparent reason. That’s usually a photocell problem or a force-setting issue on the opener, and it typically runs $180 to $300. If the gate itself is off-track or the rack is worn, add $150 to $400 in parts and labor depending on the opener brand and rail condition.
Automated Opener and Safety Edge Repair
When an electric driveway gate in Converse starts behaving unpredictably, the safety edges and photo-eyes are almost always involved. These are the sensors that tell the gate to stop when something – a car, a kid, a trash can – is in the path. A misaligned photo-eye or a cracked safety edge can make the gate reverse constantly or refuse to close. We diagnose the sensor, check the force limits, and replace worn components on the spot. Most of this work is done same-day when we’re already in Converse.
Ornamental Gate Matching for HOA Driveways
This is where Converse is different from most metro areas we serve. A lot of newer subdivisions require wrought-iron or aluminum driveway gates to match a specific pattern, color, and height. You can’t just hang any gate off the shelf. We work with the homeowner or the management company to identify the original fabricator when possible, or match the scrollwork and finish with a local metal shop. The repair price depends on the extent of custom work, but expect $300 to $700 for structural repair plus finish matching on ornamental gates. We confirm the HOA’s requirements in writing before we touch anything.
Trusted Brands We Service in Converse
We’re factory-familiar with nine major opener brands, and in Converse we see a lot of LiftMaster on newer HOA installs, DoorKing on community entry systems, and Mighty Mule on rural and semi-rural driveway gates. We stock common parts for these brands locally, so a lift arm, control board, or loop detector doesn’t have to ship from California before we can finish the job. For older Elite and Linear operators still running on Converse acreage, we carry retrofit kits that extend the life of the existing gate hardware without a full replacement.
See the difference
Before
After
Before
After
Before
AfterCommon Gate Repair Problems We See in Converse Homes
- Shifting post footings. Converse’s clay soil swells with rain and shrinks in drought, which slowly pushes hinge posts out of plumb and makes swing gates drag or bind. We reset the footing and pack it for expansive soil rather than re-using the original concrete.
- Photocell and loop detector faults after storms. Severe thunderstorms knock sensors out of alignment and corrode underground detector leads. The gate then refuses to close, reverses mid-travel, or stays open – which becomes a security issue in a hurry.
- Ornamental rust and warp. Humid summers accelerate rust on wrought-iron gates, especially where sprinkler overspray hits the bottom rail. HOA communities notice this fast, and repairs often need to match the existing finish to pass architectural review.
- Worn rack and pinion on slide gates. Converse’s newer HOA subdivisions mostly use slide gates for entry, and when the rack teeth wear unevenly, the gate jerks and grinds. Left alone, it burns out the motor. We align the rack, replace worn sections, and adjust the drive tension before it gets expensive.
Pricing for Gate Repair in Converse, TX
Here are the numbers we quote on a typical Converse job, before parts. A service call with diagnosis and minor adjustment runs $110 to $180. Gate opener repairs – sensors, limit switches, control boards – run $180 to $340. Hinge and post work runs $250 to $600 depending on the footing and the gate weight. Full ornamental gate repair with finish matching runs $300 to $700. Slide gate rack and pinion work runs $200 to $450. We write the price down before any work starts, and the invoice matches that number. Every repair carries a 365-Day Done Right Promise: if the repair fails within 365 days, we return at no charge. Call (361) 314-4803 for a free estimate over the phone.
We Also Serve Cities Near Converse
Most of our Converse calls come from neighborhoods along Toepperwein Road and Kitty Hawk Road, but our crews also run service routes to Gate Repair in Converse neighbors in Cibolo, San Antonio, Bulverde, and Helotes. If you’re managing a rental property or an HOA with gates in more than one of these communities, one call sets up service across all of them. Same tech, same written pricing, same guarantee.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Converse
Most Converse HOAs with gated entries require approval before any repair that changes the gate’s color, material, height, or ornamental pattern. We request the community’s architectural guidelines before quoting, then document the proposed repair with photos and material specs the management company can review. If the HOA requires a matching finish or pattern, we confirm that scope in writing before starting. Call (361) 314-4803 and we’ll walk you through the approval path for your specific community.
Nine times out of ten, an automatic gate in Converse that stops or reverses mid-cycle has a photocell out of alignment or a safety edge that’s cracked and sending a false obstruction signal. The parent issue is usually storm debris, a bump from a delivery truck, or moisture in the sensor housing. We recalibrate or replace the sensor, check the operator’s force settings, and test the full travel path before we call the job done. This is a safety system – a gate that reverses unpredictably can injure someone, so don’t keep overriding it. Get it diagnosed.
Yes. Many Converse properties east of FM 1516 and south of Lower Seguin Road run Mighty Mule or Ghost Controls solar openers, and we service those systems on site without needing grid power. The typical failure is a degraded battery that won’t hold charge through cloudy spells, or a solar panel that’s been turned away from southern exposure by wind or tree growth. We test the panel output, replace the battery if it’s failing, and verify the opener’s standby draw. Solar opener repairs usually run $180 to $300 before parts.
First, stop forcing it. A sagging wood gate after heavy rain means the post footing has moved or the hinge screws have stripped, and every cycle makes it worse. The long-term fix in Converse’s clay is to reset the post footing in gravel-bedded concrete and through-bolt the hinges, not just tighten old screws. In the short term, you can lift the latch side to clear the ground and secure the gate closed so it doesn’t swing in the wind. Then call (361) 314-4803 for a proper re-hang with a written price.
No. Grinding near the motor on a slide gate usually means worn rack teeth, a misaligned drive gear, or a failing bearing – and every cycle is damaging the motor. If the gate is a community entry, you also have a liability problem: a gate that binds and shudders can trap a car or injure a pedestrian. We shut the gate down to inspect, quote the rack or gear repair, and keep resident keypad access live with a temporary bypass when the community manager asks for it. Most rack and pinion repairs on Converse slide gates run $200 to $450.
If your gate is acting up in Converse, call Calder Gate Repair at (361) 314-4803. A live person answers, 24 hours a day. You’ll get a written price before any work starts, a trackable arrival time, and a 365-Day Done Right Promise in writing on every repair. If we don’t get it right, we come back free.
Written by Nico Alvarez, Owner at Calder Gate Repair San Antonio, serving Converse through the Relay Home Co. family since 2009.