Wood & steel frame
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Converse, TX
Gate repair in Converse, TX usually costs between $180 and $640 depending on whether it’s a mechanical fix, an electrical issue, or an opener replacement, and most jobs are completed the same day. Calder Gate Repair handles all of it: gates that sag or won’t close, openers that stopped responding, and HOA-required repairs where the gate has to match the rest of the street. If your gate is down in Converse, call (361) 314-4803 and you’ll get a real person, a straight answer, and a written price before any work starts.
Why Converse Homes Are Different
Converse sits on clay-rich soil that doesn’t stay put. It expands when wet and contracts in the heat, and that slow movement is hard on gate posts. We regularly see posts that have drifted out of alignment by half an inch or more, which throws off the latch, drags the gate on the ground, and eventually burns out the opener motor trying to compensate. The San Antonio-area humidity and 100-degree summer days take their own toll: circuit boards fail more often in enclosed operator boxes, and wood gates on the older 1970s-to-1990s lots warp faster here than almost anywhere else in the region.
The other thing that defines Converse gate work is the mix of property types. A technician might spend the morning on a modern HOA subdivision near Kitty Hawk Road where the driveway gate has to match the wrought-iron spec exactly, then drive ten minutes to a semi-rural lot off FM 1516 where a ranch-style pipe gate needs a completely different approach. That range is exactly why we stock parts for both residential automation and heavier-duty operators on the truck. In newer subdivisions, the HOA almost always requires that any replacement gate or section match the original ornamental design, and we regularly custom-fabricate or color-match aluminum and wrought iron to pass inspection the first time.
Styles & brands we work with
Our Main Converse Services
Most Converse calls fall into three buckets: a gate that physically won’t move, an electric system that stopped doing what it should, or an opener that runs but won’t operate the gate. Each has its own Converse page below with local pricing and specifics.
Gate Repair in Converse
This covers the mechanical side: sagging or dragging gates, bent hinges, broken welds, rusted frames, latches that won’t catch, and posts that have shifted out of alignment in the Converse clay. On the older ranch-style properties around Converse, we often find pipe gates where the hinges have worn oval after years of use and the whole gate has to be re-hung. On newer HOA lots, the job is more often a weld crack or a section that needs fabrication to match the rest of the street. See Gate Repair in Converse for prices and the full breakdown.
Electric Gate Repair in Converse
Electric gate problems in Converse usually trace back to one of a few things: a failed circuit board baked by the Texas heat, a bad connection that got corroded during a storm, or a wiring run that’s been damaged by the shifting soil. We diagnose the full system rather than swapping one part and hoping, because in this climate a symptom like “gate opens but won’t close” often has two contributing causes. Every repair goes on a written quote before we touch a wire. Read more at Electric Gate Repair in Converse.
Gate Opener Repair in Converse
When the opener itself is the problem, we work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, and we carry the most common boards, limit switches, and remotes for these brands on the truck. In Converse, heat is the biggest killer of opener internals: a swing-arm opener in an unshaded box on the west side of the house will fail years earlier than the same unit in shade. The fix is often a board replacement, but we always check limit settings and force thresholds too. Details and pricing at Gate Opener Repair in Converse.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Converse
We’re factory-familiar with LiftMaster, DoorKing, Elite, and Mighty Mule, plus five other major opener brands. Common boards, remotes, and limit switches for these brands ride on the truck, which means most Converse repairs are finished in a single visit. You can see the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Converse, TX
| Service | Typical range in Converse |
|---|---|
| Gate repair service call | $59 – $110 |
| Gate opener repair | $180 – $640 |
| Circuit board replacement | $220 – $510 |
| Sensor or photo-eye replacement | $130 – $280 |
| Hinge replacement or repair | $90 – $310 |
| Post realignment and re-setting | $260 – $620 |
| Welding repair on steel or aluminum gate | $120 – $410 |
| Full-opener replacement | $720 – $1,690 |
| Remote, keypad, or receiver install | $80 – $260 |
The biggest price movers in Converse are post alignment and fabrication work. If the shifting clay has moved a post enough that it has to be dug out and re-set in concrete, that adds real labor, and if an HOA requires a custom-fabricated gate section to match the existing wrought iron, materials go up accordingly. Whatever the job, you get a written price before we start, and the invoice matches that number.
Neighborhoods We Serve in Converse
We cover all of Converse, from the older subdivisions around the original town center to the newer HOA communities and the semi-rural lots on the northern and eastern edges. We’re typically on-site within 60 to 90 minutes for most Converse calls.
- Converse North and FM 1516 corridor
- Kitty Hawk Road area
- Miller’s Crossing
- Crownridge and surrounding newer subdivisions
- Semi-rural properties east of Loop 1604
Service Area – Cities Near Converse
Our Converse crews also serve the surrounding area daily. If you’re just outside Converse, we regularly work in Cibolo, TX, San Antonio, TX, Bulverde, TX, and Helotes, TX. Same written-price guarantee applies everywhere we go.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Converse
We usually arrive within 60 to 90 minutes for most Converse neighborhoods and the outlying areas along FM 1516. Every call is answered by a live person who can give you a real arrival window, not a four-hour range, and you can track the technician on the way.
Almost always, yes, if your subdivision has an HOA that governs driveway gates. Most Converse HOAs require that replacement gates or repaired sections match the original material and finish. We’ll match the existing design and provide photos and specs if your HOA needs documentation before sign-off.
Every repair is covered by the 365-Day Done Right Promise. If the same problem comes back within 365 days, Calder Gate Repair returns and fixes it at no charge, no second invoice, no argument. That’s in writing on every job.
Both. We work the newer HOA neighborhoods, the older 1970s-to-1990s subdivisions, and the larger lots on the edges of Converse where ranch-style pipe gates and heavy custom gates are common. If you’re in the Converse area and have a gate, we’ll come look at it.
If your gate is acting up in Converse, call Calder Gate Repair at (361) 314-4803. You’ll talk to a real person, get a straight answer on cost, and we’ll have a technician on the way with a written price before any bolt gets turned.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Converse Customers Say
"Booking was easy and the job was done quickly."
- Seth R."Swing gate arm replaced and aligned. Got photos of the old part by text."
- Nadia F."Safety sensors realigned. Works fine. Photo eyes were dirty and out of line. Gate now stops when it should."
- Raul A.