Wood & steel frame
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Kirby
Gate repair in Kirby usually runs between $180 and $450 for common fixes like sagging hinges, misaligned latches, and opener troubleshooting, with full operator replacements landing higher depending on the brand and access. Most repairs in Kirby are completed the same day we diagnose them. If your gate won’t open, won’t stay shut, or grinds against the post every time the wind blows, call Calder Gate Repair San Antonio at (361) 314-4803 and we’ll give you a written price before any work starts.
We know Kirby’s gates. The neighborhoods off Ackerman Road, the older ranches near Binz-Engleman, the corner lots around Randolph AFB with chain-link that’s been there since the Johnson administration. Our Gate Repair team works on this housing stock every week, and that local familiarity means we diagnose problems faster and quote honestly.
Why Calder Gate Repair San Antonio Is Kirby’s Preferred Gate Repair Company
Kirby homeowners call us because we show up when we say we will, with a live arrival time you can track from your phone. No four-hour windows. No “sometime between noon and whenever.” Our technicians are background-checked, uniformed, and dispatched from the San Antonio office with your exact ETA before they leave.
The 365-Day Done Right Promise is the other reason. If the repair fails within 365 days, Calder returns at no charge. That’s it. Written on every job. Not a verbal maybe, not fine print.
Nico Alvarez runs our Kirby service routes and makes sure every customer gets a written price before work begins, a digital invoice you pay from a link, and before-and-after photos so you can see what was actually done. The Relay Standard applies to every job: live arrival time, clear scope, written guarantee.
We also answer the phone with a live person 24/7. You won’t get a voicemail tree when your gate is stuck open at 9pm and your dog thinks the street is his new backyard.
Styles & brands we work with
Iron Gate Repair in Kirby
Iron Gate Repair in Kirby typically costs $220 to $500 depending on whether we’re rebuilding a hinge, straightening a bent top rail, or welding a cracked frame member. Most of the iron gates here are actually wrought-iron-look tubular steel from the 1960s through 1980s, and the failure pattern is predictable: rust at the bottom rail where water pools, hinge pins worn egg-shaped, and posts that lean as the clay soil beneath them shrinks and swells. We cut out the rotted section, weld in new steel, grind it flush, and repaint with a rust-inhibiting primer so the repair doesn’t telegraph through in six months.
Weld Repair and Frame Strengthening
When a bottom rail rusts through, patching it with bondo or a sleeve clamp is a temporary band-aid. We cut back to clean metal and weld in a full-thickness replacement section. If the gate has sagged more than an inch at the latch side, we add a steel gusset at the hinge corners while we’re in there, because that’s the difference between a repair that lasts three years and one that lasts fifteen.
Hinge and Post Rebuilds
Kirby’s expansive clay is rough on gate posts. A shallow footing from 1975 heaves and cracks, the post leans, and suddenly the latch doesn’t line up. We cut the old footing, reset the post deeper in concrete, and rehang the gate with new sealed bearing hinges. This is a common job on the east side near Ackerman, where live oak roots compound the clay problem.
Sliding Gate Repair in Kirby
Sliding Gate Repair in Kirby usually runs $260 to $550 for roller replacement, track realignment, and opener calibration before any brand-specific parts. Sliding gates here are less common than swing gates, but they show up on wider driveways and a handful of mobile home lots scattered through the older sections of Kirby. The recurring issues are worn track rollers that make the gate shudder and stall, a track that’s drifted out of level because the concrete pad shifted, and limit switches that have lost their position so the gate either slams or stops six inches short.
Track and Roller Service
When a sliding gate starts screeching or jerking mid-travel, the rollers are almost always the culprit. We replace them with sealed units sized to the gate weight and get the track back to level with shims or a corrected pad. Ignoring a bad roller eats the track, and track replacement triples the job cost.
Opener and Limit Switch Calibration
A limit switch, which is the small sensor that tells the gate when to stop, drifts out of calibration over time. We re-set the limits, test the obstruction sensing, and confirm the gate reverses properly under load. On older operators without modern UL 325 entrapment protection, we’ll give you a straight answer on whether it’s worth retrofitting or cheaper to replace.
Trusted Brands We Service in Kirby
We’re factory-familiar with Linear, Viking, and Ghost Controls, three of the most common operators on Kirby properties, plus six other major brands. That means we don’t show up and google your opener model. We know the board layouts, the common failure points, and the part numbers. For Kirby customers, we keep a rolling stock of Linear and Ghost Controls boards, remotes, and photocells in the van, so a routine opener repair doesn’t turn into a two-trip job. Gate Repair in Kirby shouldn’t wait a week for a part that ships from Dallas.
Common Gate Repair Problems We See in Kirby Homes
- Leaning hinge posts from expansive clay. Kirby’s soil swells when it rains and shrinks when it cooks in the August sun. Shallow concrete footings from the original 1960s installation crack under the cycle, and the post starts to lean. This is the single most common gate problem in Kirby, and it recurs unless the post is reset deeper and the gate rehung with reinforced gussets.
- Rusted bottom rails on tubular steel gates. High humidity plus direct sun eats through lightweight steel where water sits inside the bottom rail. We see this constantly on chain-link and ornamental gates along Binz-Engleman Road. The fix is cut, weld, and repaint, not a wrap or a sleeve.
- Obsolete operators failing home inspections near Randolph AFB. Tenant turnover means regular inspections, and inspectors flag operators that predate current UL 325 entrapment standards. Many Kirby homes still run 1970s and 1980s boards that can’t accept modern photocells. We retrofit where possible and recommend replacement when the board is too old to be made safe.
- Gates that bind after heavy rain. When a big thunderstorm rolls through, the clay under the gate swells and the gate drags or won’t latch. Homeowners call thinking the gate is broken. Usually the hinge geometry shifted. We correct the hang and, on corner lots with mature oaks, adjust for root pressure that’s been slowly moving the post for years.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Kirby, TX
Here’s what Kirby homeowners can expect to pay, in writing, before any work begins:
| Repair Type | Typical Range (before parts) |
|---|---|
| Hinge replacement and gate realignment | $180 – $320 |
| Weld repair on steel or iron gate | $220 – $420 |
| Post reset and re-concrete | $350 – $650 |
| Opener board or limit switch replacement | $190 – $380 |
| Full operator replacement | $600 – $1,400+ |
The numbers move based on gate weight, access, and whether we need to bring in a concrete saw. You’ll always get a written quote agreed to before we touch a bolt. Estimate are free. Call (361) 314-4803 and we’ll give you an exact number.
We Also Serve Cities Near Kirby
Our crews cover Kirby and the surrounding communities, including San Antonio, Cibolo, Helotes, and Selma. If your property sits on the edge of Kirby or you’re managing a rental near the base, we can typically route a technician the same day. Scheduling and dispatch run through our San Antonio office, but the crew that arrives is local and already knows the soil, the housing stock, and the gate brands common to this part of Bexar County.
Serving Kirby, TX - Our Local Coverage Area
We’re based in the Kirby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Kirby
Your gate leans after rain because Kirby’s expansive clay swells and shifts shallow post footings, and continuing to use a badly leaning gate stresses the hinges and latch until something breaks. If it’s off by more than an inch at the latch, stop using it and call us at (361) 314-4803. We’ll reset the post and get it closing square again.
Some 1970s operators can be retrofitted with new photocells and an external entrapment protection module, but many original control boards are too old to accept the wiring or lack reverse-on-obstruction logic. We’ll test it on site and tell you straight if retrofitting is safe and cost-effective, or if a new operator is the cheaper long-term answer.
Live oak roots absolutely cause gate problems in Kirby, especially on the east side near Ackerman Road where mature trees push up concrete walkways and shift gate posts. We rebuilt a sagging chain-link swing gate on a 1960s ranch off Ackerman where a root had lifted the hinge post 2 inches off plumb. Our crew cut the post footing, reset it in a deeper concrete base, and added a steel gusset before rehanging the panel, then wired a new LiftMaster operator with a safety photocell so the gate wouldn’t bind on the shifted latch.
Rusted wrought-iron gates in Kirby can usually be repaired if the damage is at the bottom rail or hinge points, which is where moisture collects and corrosion starts. We cut back to clean steel, weld in new sections, and repaint. If the frame is rusted through in multiple places or the posts are comprimised, replacement is often cheaper than piecemeal welding, and we’ll tell you that before you spend a dollar.
A typical gate repair in Kirby runs $180 to $450 before parts, with weld work, post resets, and opener replacements pushing toward the higher end. We give free estimates over the phone based on photos, and every job gets a written price before work starts. Call (361) 314-4803 for an exact quote.
Call Calder Gate Repair San Antonio for Gate Repair in Kirby
If your gate is leaning, rusted through, refusing to open, or failed an inspection, call us. We’ll answer with a live person, give you a real arrival time, and put the price in writing before any work starts. Nico Alvarez and the Calder team serve Kirby every day. Reach us at (361) 314-4803 for a free estimate.
Written by Nico Alvarez, Owner at Calder Gate Repair San Antonio, serving Kirby and the surrounding communities.