Sliding driveway gates
Wood & steel frameFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterDriveway Gate in San Antonio, TX
A driveway gate in San Antonio does two jobs at once: it keeps your property private and it takes a beating from Hill Country limestone dust, July heat, and the occasional runaway trash can. Calder Gate Repair San Antonio installs, repairs, and retrofits driveway gates of every style, from single swing arms on Alamo Heights bungalows to double slide gates on Dominion and Stone Oak acreage. Whether you’re starting fresh with a Gate Installation in San Antonio or nursing an old gate that groans every morning, we’re the team that shows up when we say we will, with a written price before any work starts. Call (361) 314-4803 and a live person picks up, any hour.
Nico Alvarez leads every job, and his crew knows the difference between a gate that needs a hinge adjustment and one that needs a full track replacement. That matters here, because San Antonio’s shifting clay soil moves gate posts over time, and a gate that was perfectly square in 2019 can bind by 2024. We see it on a weekly basis from Terrell Hills to Helotes.
When You Need Driveway Gate
Most homeowners don’t think about their driveway gate until it stops cooperating. Here are the situations where San Antonio customers call us most:
- The gate won’t open or close fully. It stops three feet short, reverses halfway, or just sits there humming. Often this is a limit switch issue (the small sensor that tells the gate when to stop), but it can also point to a failing capacitor or a bent track section.
- The gate moves too slowly or jerks. In San Antonio’s summer heat, older opener motors overheat and lose torque. If your gate crawls on a 102-degree afternoon but runs fine at 7 a.m., that’s a thermal warning sign worth addressing before the motor gives out entirely.
- You hear grinding, popping, or metal-on-metal noise. Grinding usually means a gear or chain problem. Popping often traces to a cracked weld or loose hinge bracket. Ignoring it turns a $300 repair into a $1,500 replacement fast.
- Your gate sags or scrapes the driveway. This is one of the most common calls in older San Antonio neighborhoods like Alta Vista and Monticello Park, where post footings were poured decades ago and soil movement has done its work. A sagging gate stresses the opener and shortens its life.
- You bought a home with a gate that was never set up right. We see this constantly in fast-growing areas like Cibolo and Schertz. The gate opens the wrong direction, the keypad is wired backwards, or the safety sensors were never installed. These are fixable in a single visit.
- You want a new gate or a full replacement. New build, teardown, or an upgrade from chain-link to ornamental iron. We work with the opener brands you’re most likely to own, including Viking, Ghost Controls, DoorKing, and Elite, and we match the hardware to the gate weight, not the other way around.
Our Driveway Gate Process
Here’s exactly how a driveway gate job goes with Calder Gate Repair San Antonio, from first call to final invoice:
- Call us at (361) 314-4803. A live person answers 24/7. No voicemail, no chatbot, no “press 4 for the gate department.” You explain what’s happening, we ask the right questions, and we book a time that works.
- You get a trackable arrival window. Our technicians are dispatched with a live arrival time you can follow on your phone, the way you’d track a rideshare. You’ll know who’s coming and when they’ll pull up to your driveway.
- We diagnose on site. Nico or one of our background-checked, uniformed technicians inspects the gate, tracks, hinges, opener, safety sensors, and keypad. We explain what’s wrong in plain language, using the trade term first and then what it actually means.
- You get a written price before any work starts. Not an estimate. Not a range. A written dollar figure for the job. If you approve, we do the work right there. The number on the invoice matches the number you agreed to at the door.
- We repair or install, then test. Every job is tested through multiple full cycles. We check safety sensors, obstruction detection, and alignment before we call it done. You get before-and-after photos and a digital invoice you can pay from a link.
- Your repair is covered by the 365-Day Done Right Promise. If the repair fails within 365 days, Calder returns at no charge. That’s written on every job, every time.
Driveway Gate Pricing in San Antonio
What does a driveway gate cost in San Antonio? That depends on whether you’re repairing or installing. Most gate opener repairs in San Antonio run $180 – $340 before parts. Full gate installations start around $1,800 for a single swing gate with a basic opener, and climb from there based on material, size, and opener choice. A double slide gate in heavy ornamental iron with a premium opener can run $6,000 – $12,000. Here’s a honest breakdown of what you’re paying for:
- Service call and diagnosis: $75 – $120, often waived or credited toward the repair if you proceed same visit.
- Limit switch adjustment or replacement: $120 – $220. These are the sensors that tell the gate where to stop, and they fail regularly in San Antonio’s dust-heavy air, especially around new construction zones.
- Hinge or bracket repair: $150 – $400 depending on gate weight and access. Heavy iron gates take longer and need more hardware.
- Opener motor replacement: $450 – $900 for most Viking, Ghost Controls, or DoorKing units, including labor.
- Full gate opener system with keypad and safety sensors: $1,200 – $2,800 installed, brand and gate size dependent.
- New single gate and opener: $1,800 – $4,500 installed.
- New double gate with slide or dual-swing configuration: $4,500 – $12,000 installed.
These are honest San Antonio market ranges, not padded quote tricks. The factors that move the price: gate weight and material, opener brand and horsepower, whether we’re working on existing posts or pouring new footings, and how much of the old hardware can be reused. In neighborhoods like King William District, where historic gates sometimes need custom fabrication, expect the top of each range. In newer communities like Alamo Ranch, where gates are lighter and posts are recent, most jobs land in the middle. We give you a written price before any work starts, and estimates are always free. Call (361) 314-4803 for an exact quote on your gate.
Why San Antonio Homeowners Choose Calder Gate Repair
We’re the gate repair specialist inside the Relay Home Co. family, a network founded in 2009 and independently owned at each location. That matters in a practical way: we’re big enough to have standardized pricing and the Relay Visibility Guarantee, but local enough that Nico Alvarez himself answers for every job. Our technicians are factory-familiar with the brands San Antonio homes actually have installed. We don’t send a generalist to figure out your Ghost Controls board on the fly. We send someone who’s been trained on it.
The Relay Standard is our booking-to-invoice experience, and it’s the same every time: a live trackable arrival time, uniformed and background-checked technicians, before-and-after photos, and a digital invoice you pay from a link. No paper, no surprises, no phone tag. If it’s a repair, the 365-Day Done Right Promise applies. If the repair fails within 365 days, we come back free. That’s the whole point.
Driveway Gate Safety in San Antonio
Driveway gates are heavy, and the springs and tension systems that move them are under serious load. A single driveway gate can weigh 300 to 800 pounds, and the torsion systems that balance that weight are dangerous to work on without proper training and tools. We strongly advise against DIY spring adjustment or welding hinge repairs yourself. What you can do safely is observe and report: note where the gate binds, what sounds it makes, and whether the problem happens every time or only sometimes. That information helps our technicians diagnose faster when they arrive. The actual fix? Leave it to someone who’s trained on the specific hardware you own.
FAQs – Driveway Gate
How much does driveway gate repair cost in San Antonio?
Most driveway gate repairs in San Antonio run $180 – $340 before parts, with common fixes like limit switch replacements landing between $120 and $220. Full opener motor replacements run $450 – $900 depending on brand and gate size. Every job gets a written price before work starts, and the estimate is free. Call (361) 314-4803 for a precise quote.
Can you fix a driveway gate the same day?
Yes, in most cases. Because we dispatch with San Antonio in mind and carry common parts for Viking, Ghost Controls, DoorKing, and Elite openers on the truck, many repairs are completed in a single visit. When a part has to be ordered, we give you a straight answer on the timeline before we leave the driveway.
Is it cheaper to repair or replace a driveway gate opener?
As a rule, if the opener is under 8 years old, repair is almost always the better value. If the motor has failed, the control board is burned out, and the gearbox is shot, you’re looking at three major components, and replacement often costs less than piecemeal repair. We’ll show you the numbers for both options and let you decide. The written price comes first either way.
What driveway gate brands does Calder work on?
We service and install all major residential and light-commercial brands, with factory-familiar training on Viking, Ghost Controls, DoorKing, Elite, LiftMaster, FAAC, BFT, Linear, and Mighty Mule. If your gate opener has a brand name on it, chances are one of our technicians has been trained on that exact unit. If you’re not sure what you have, send a photo from your phone when you call, and we’ll identify it on the spot.
Do you offer a warranty on driveway gate work?
Every repair is backed by the 365-Day Done Right Promise. If the repair fails within 365 days of the original job, Calder returns at no charge to make it right. That’s not a verbal pat on the back, it’s written on every invoice. We also guarantee the written price you receive before work starts is the price you pay when the job is done.
Contact Calder Gate Repair San Antonio
If your driveway gate is acting up, sagging, or simply not doing its job anymore, call us at (361) 314-4803 for a free estimate. A live person answers 24/7, every time. You’ll get a trackable arrival window, a written price before any work starts, and a repair backed by the 365-Day Done Right Promise. That’s how a driveway gate in San Antonio should work, and that’s how we do it.
Written by Nico Alvarez, Owner at Calder Gate Repair San Antonio, serving San Antonio.