Wood & steel frame
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateMighty Mule Gate Repair in San Antonio, TX | Calder Gate Repair San Antonio
Gate Repair in San Antonio for Mighty Mule units runs $160 to $410 for most jobs, depending on whether you’ve got a dead control board, a seized arm, or a transformer that took one too many summer thunderstorm hits. We’re Calder Gate Repair San Antonio, and we service every Mighty Mule model still bolted to a gatepost in this city. Our crews stock the MM series boards, arms, and transformers locally so you’re not waiting on a FedEx truck from Georgia while your driveway sits wide open. Call (361) 314-4803 and we’ll get a tech headed your way.
Why San Antonio Residents Choose Us for Mighty Mule Service
Mighty Mule is one of the most common openers we see in San Antonio, and we know the line well enough to diagnose it over the phone half the time. That matters when your MM136 starts opening on its own at 3 p.m. or your MM562 slide motor grinds to a stop halfway. Our lead tech Nico Alvarez cut his teeth tracing gate opener failures across Southern California before moving to Texas, and he’s spent years running Mighty Mule service calls all over San Antonio, from Stone Oak cul-de-sacs to Monte Vista’s ornamental iron gates. Working within the Relay Home Co. family means every job carries the same three guarantees: a written price before anything gets opened up, a written guarantee on the repair itself, and a free return visit within 365 days if the same fix fails. We also run a 24/7 live answering line, not a night service with a call-back promise.
Styles & brands we work with
Common Mighty Mule Gate Repair Problems We Solve in San Antonio
- Dead or glitching MM136/MM137 control boards. The 100°F-plus heat inside a black control housing in Alamo Ranch or Stone Oak cooks capacitors until the board starts issuing random open commands, or none at all. We replace swollen capacitors and re-flash settings before selling you a board you may not need.
- Rusted MM136 hinge mounts and chassis plates. San Antonio’s humidity combines with constant gate flex to chew through the steel on older arms. We rebuild hinge assemblies in-house for a fraction of the cost of a full arm swap.
- MM562 AC transformer burnout after power surges. A summer thunderstorm rolls through, the grid spikes, and your slide gate sits stuck in a partial-open fault. If you’re on the city’s southern stretches where storms roll in hard, we recommend a surge protector retrofit while we replace the transformer.
- Water getting into MM371W arms along low-lying lots near Leon Creek. The power cable grommet at the back of the arm cracks, rain gets inside, and the limit switch circuit shorts. We seal the entry point with weatherproof grommets and heat-shrink casing so it doesn’t happen twice in one season.
- Grinding and stalling on hillside gates. On San Antonio’s North Side slopes, a Mighty Mule linear motor fighting gravity against a sagging gearbox will grind and stall halfway. We re-torque gearboxes to factory spec or replace worn internal gears before the motor seizes entirely.
Mighty Mule Service in San Antonio: What Local Conditions Mean for Your Equipment
San Antonio is the only major Texas city where Mighty Mule owners routinely contend with two things most other markets never see: limestone-bedrock piers and Historic and Design Review Commission rules. In neighborhoods like King William and Monte Vista, the homes sit on shallow limestone that shifts when summer droughts draw moisture out of the soil. A shift of half an inch at the pier is enough to throw a swing gate out of alignment so the FM136 arm strains against its hinge mount. We’re used to it. On top of that, houses in these historic districts fall under design review rules that require non-invasive mounting on original wrought iron gate frames. Our crews use cedar post sleeves or steel plates to carry the opener’s weight without drilling into 1920s iron. That’s not a generic fix. It’s a San Antonio fix, and we’ve done it enough times that we can quote it before we roll up.
Mighty Mule Models & Products We Service in San Antonio
We service the full current Mighty Mule line: MM136 and MM137 12V single and dual swing gate openers, MM271 and MM272 heavy-duty swing units, MM371W and MM372W 24V high-cycle swing kits, and MM562 and MM572 24V sliding gate motors with AC transformer backups. When your unit is under eight years old or tied into a telephone entry system, we fit genuine Mighty Mule boards, motors, and arms. For older MM136 and MM372 circuits where the exact board revision is no longer built, we install OEM-spec aftermarket boards with matching harness pinouts and calibrate torque to factory limits. We stock the common boards, transformers, and limit switch parts right here in San Antonio so most jobs finish the same day. If you’re comparing us to the national retailers, our local Mighty Mule sales & service depth is what keeps turnaround tight.
See the difference
Before
After
Before
After
Before
AfterMighty Mule Service Pricing in San Antonio
Most Mighty Mule repair calls in San Antonio land between $160 and $410 before special-order parts. A capacitor replacement on an MM136 board runs toward the lower end. A full MM371W arm swap sits higher. What drives cost is age, board revision, and whether parts are on our local shelf or need a two-day run from the distributor. Every quote includes parts and labor, and the number we hand you before work starts is the number on your invoice. You can expect that in writing, and you can expect it without asking. If the repair fails inside 365 days, Calder returns free. Always. Call (361) 314-4803 for a free estimate on your Mighty Mule repair in San Antonio.
Serving San Antonio, TX - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Mighty Mule Gate Repair in San Antonio
Black control housings bake under direct Texas sun and internal temperatures climb past 140°F, which trips the thermal auto-close sensor into issuing false open commands. We re-aim the receiver, replace any swollen capacitor, and add a galvanized shade bracket off the gate frame or fence. That’s standard on any Electric Gate Repair - San Antonio call we run in summer. In Monte Vista, we’ve cured phantom activations on West French Place by doing exactly that. Call (361) 314-4803 and we can check yours.
Yes. San Antonio’s Historic and Design Review Commission rules require non-invasive mounting on original iron gates, and we work within them daily. Our crews use cedar post sleeves or steel plates to clamp the opener without drilling into original material. Same approach we use across Monte Vista and King William. It holds the arm’s weight without altering your gate’s historic fabric.
Usually it’s the gearbox binding against a gate that’s out of alignment because limestone beneath the pier post shifted during a dry spell. The motor doesn’t know the gate is fighting gravity, it just pulls until the torque limiter gives up. We re-align the gate first, then re-torque the gearbox. If the internal gears show more than 30% wear, we recommend replacement before the unit seizes mid-cycle.
We carry the 24V transformers for MM371W and MM372W units on our San Antonio service trucks. That’s one of the parts that dies during storm season thanks to power surges along the city’s southern storm tracks, so we keep it on hand. If yours is paired with an MM562 slide motor backup, we’ll check that transformer too while we’re there.
It’s usually the limit switch not seating properly when the gate reaches its closed stop point, especially after gusts or long dry spells shift the gate slightly. But it can also be a loop detector false-positive when metal reinforcement in the driveway heats unevenly. We test both on-site. If replacing the limit switch doesn’t stop the creep, we’ll chase the loop. Call (361) 314-4803 and we’ll pin it down. Estimates are free.
Service Areas Near San Antonio
We run Mighty Mule repair calls across San Antonio and into the surrounding suburbs. That includes San Antonio service area coverage from Alamo Ranch to the Pearl District, plus Mighty Mule service in Cibolo, Mighty Mule service in Helotes, Selma, Bulverde, and Live Oak.
Book Your Mighty Mule Service in San Antonio Today
Your Mighty Mule gate opener doesn’t need to sit dead while you wait on parts that could be on our truck right now. Call (361) 314-4803 and we’ll get a tech out with a written quote before any work starts. Same-day service is available for most repairs in San Antonio.
Written by Nico Alvarez, Owner & Lead Gate Technician at Calder Gate Repair San Antonio, serving the city since 2009.