Wood & steel frame
Sliding driveway gatesFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateBFT Keypad & Intercom Repair: The San Antonio Owner's Guide
BFT keypad and intercom repair in San Antonio typically runs $185 – $420 installed, depending on whether we're replacing a single keypad unit or rebuilding an intercom module with new wiring. We stock BFT-compatible keypads and intercom boards on the truck, so most repairs are done in one visit. The usual giveaway that yours is failing: the gate works fine from the remote in your car, but the keypad at the driveway either ignores the code, accepts it intermittently, or the intercom crackles and dies midsentence when a delivery driver tries to reach you.
Which BFT Models This Applies To
We repair and replace keypads and intercom components across the common BFT lines we see in San Antonio yards: the Rigel series, Phobos, Deimos, Argo, and the older Ditec-labeled BFT boards that still turn up in neighborhoods like Terrell Hills and Alamo Heights. The compatibility gotcha with BFT keypads is the control board protocol. A MITTO or RB keypad wired into an older D-series board won't always speak the same low-voltage language, even if the connector fits. Before we quote a replacement, we check the board revision number on the control box, not just the keypad model number. Generic off-brand keypads will sometimes power on and look right, then fail to trigger the open command because the pulse timing is off. We use OEM BFT keypads when they're available and sensible, and proven aftermarket equivalents when the OEM part is backordered. We're an independent San Antonio service provider, not a BFT dealer, and not affiliated with BFT. That means our recommendation is based on what actually works for your system, not a parts-catalog upsell.
Styles & brands we work with


Signs Your BFT Keypad & Intercom Repair Is Failing
- Code works once, then nothing. The keypad membrane is worn or the relay on the interface board is sticking. We see this on gates that face west and soak up San Antonio sun every afternoon, which bakes the circuit board behind the keypad face.
- Keypad lights up but won't trigger the gate. The board is receiving power but not sending the open pulse. On BFT units, this is often a dead output transistor on the keypad interface, not the keypad itself.
- Intercom audio is loud static or one-way. The speaker wire has corroded, or the microphone element inside the call box is shot. Humidity and heat cycling through a gated entry in Stone Oak or Helotes can do this inside five years.
- Gate opens from the remote but not the keypad. The keypad's coded memory has reset. This is fairly common after a power flicker during thunderstorm season, and it means the programming chip lost its stored codes.
- Buttons need three or four hard presses to register. The physical membrane is worn through at the most-used numbers. We see it most on keypads installed in 2015 or earlier that get daily use from family, pool crews, and delivery drivers.
Replacement Cost & What's Included
Here's what BFT keypad and intercom repair costs look like in the San Antonio market, installed:
- Single keypad replacement: $185 – $295 installed, including the new keypad, mounting hardware, wiring terminations, and programming.
- Intercom module rebuild (audio board + speaker/mic): $290 – $420 installed, depending on whether we reuse the existing call box housing or replace the faceplate too.
- Keypad + intercom full swap on an older BFT system: $390 – $520 installed, including testing the full call-and-open sequence from the street.
The range shifts based on how much wiring we can salvage. A gate post with clean, dry wiring running back to the control box makes for a straightforward swap. Corroded wire inside the post, or a box that's been chewed by ants, pushes the labor up. Every quote is in writing before we touch a screw, and it includes the part, the labor, and the programming. The price on the estimate is the price on the invoice. We also cover the work with the 365-Day Done Right Promise: if the repair fails within a year, we come back free and fix it.
See the difference
Before
After
Before
After
Before
AfterDIY or Call Us?
There's a small slice of this you can safely check yourself before calling, and I'll be straight about where that ends. You can look at the keypad face for cracked plastic, clean the keypad surface with a dry cloth, and check the control box for tripped breakers. What you should not do is open up the keypad housing and start testing terminals on a live BFT board. These systems run on low voltage, but a shorted test lead across the wrong two pins can fry the control board that drives the whole gate. That's a $300 mistake on top of the keypad repair. We've shown up to more than one San Antonio home where a well-meaning neighbor with a multimeter turned a keypad problem into a full board replacement. Nico Alvarez has pulled wire and diagnosed boards across Southern California and now all over San Antonio, and even with that background, the first move is always to kill power at the breaker and test the unit dead. If your keypad is acting up and you want it handled the same day, call us at (361) 314-4803. We answer, we quote it in writing, and we fix it.
FAQs
Most BFT keypads and intercom modules last 7 to 12 years in San Antonio's heat and humidity, though units exposed to direct afternoon sun on a west-facing gate post can start failing after five or six years. The keypad membrane and the intercom speaker are usually the first to go. Call (361) 314-4803 if yours is acting up, and we'll diagnose it over the phone before we roll a truck.
Sometimes. If the failure is a programming issue, a loose terminal, or a bad wire splice, we repair it rather than replace it. If the membrane is worn through or the board is water-damaged, replacement is the honest call. Call (361) 314-4803 and we'll tell you which way it's leaning before we quote anything.
Most BFT keypad and intercom replacements take 1 to 2 hours on site, including removing the old unit, splicing in new wiring where needed, mounting the new part, and programming access codes. We test the full sequence from the street before we leave. Call (361) 314-4803 to get a written estimate and a real arrival time.
Yes, we stock common BFT keypads, intercom boards, and wiring kits on our San Antonio service vehicles, along with parts for LiftMaster, Mighty Mule, and Ghost Controls systems. If your system needs a less common BFT board revision, we can usually have it in hand within a couple of days. Call (361) 314-4803 and we'll confirm what we have before we dispatch.
Call Calder Gate Repair San Antonio for BFT Keypad & Intercom Repair
If your BFT keypad is ignoring codes or your intercom sounds like a drive-thru speaker in a rainstorm, we can fix it. Calder Gate Repair San Antonio is the dedicated gate repair specialist inside the Relay Home Co. family, and we're factory-familiar with BFT systems from the Rigel to the Deimos. Every job comes with three non-negotiables: a written price before any work starts, a written 365-Day Done Right Promise, and a live person who answers the phone 24/7. If the price isn't in writing, it isn't real, we'll text it to you before we open our toolbox. Call (361) 314-4803 for a free estimate on your BFT keypad or intercom repair in San Antonio. We'll give you a real arrival time, a written price, and a gate that answers when someone presses the button.
Written by Nico Alvarez, Owner & Lead Gate Technician, Calder Gate Repair San Antonio at Calder Gate Repair San Antonio, serving San Antonio and nearby areas.